Top 5 Ways To Enhance Your Two-wheeler Mileage

Top 5 Ways To Enhance Your Two-wheeler Mileage

Featured Stories by Team Drivio | May 29, 2023

Consistent riding, without any hiccups, is the key to ensuring your two-wheeler doesn’t guzzle fuel. 

  • If you don’t maintain your two-wheeler, getting a good fuel efficiency figure could be tough. 
  • It’s very important to keep your bike or scooter light. 
  • Keeping it at the right tyre pressure goes a long way as well. 

For a number of obvious reasons, many Indians choose to purchase a two-wheeler instead of a car for daily transportation. First off, bikes make quick work of city traffic. Second, compared to a four-wheeler, a two-wheeler offers a significantly higher mileage.

You can occasionally discover that your bike is using less fuel due to regular use and that you are stopping at the petrol station more frequently. In this situation, you might wish to look at the following advice. You might be able to improve performance and fuel efficiency by making a few small adjustments. 

    1. Maintenance Checks Should Be Regular!

When it comes to routine bike maintenance, a variety of factors are taken into account. Your mechanic will discuss the big picture and make recommendations for upgrades or alterations to the bike to get the optimum performance. People typically have their two-wheelers inspected two to three times a year. It is recommended that a vehicle be taken to a professional whenever a season changes because changing weather conditions have an impact on a bike's performance. 

In a typical maintenance session, the condition of the engine, air filter, clutch setting, engine, chain condition, chain lubrication, and many other items are checked. Absence from these meetings will reduce performance and shorten life cycle. Since most of the bike's parts are examined during maintenance, the bike's life and performance are improved. 

    2. Check The Fuel You’re Using

Adulteration of auto fuel has long been a significant problem in our nation. Using filthy fuel can have a detrimental impact on your bike's performance and operation as well as the environment. Using contaminated fuel will result in a number of difficulties, including engine malfunction, component failure, safety hazards, etc. The tailpipe emits gases such as hydrocarbons (HC), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter (PM), etc. This has a major impact on air pollution.

The answer is to only purchase fuel from petrol stations that you know and trust. Find clean fuel stations by asking around, then go there. 

   3. Take It Easy

You should ride your bike defensively for the best possible fuel efficiency. This can be accomplished by cycling between 40 and 55 kmph on average, avoiding frequent braking, avoiding sudden acceleration, etc. High levels of fuel consumption are the outcome of abrupt acceleration. 

Respecting traffic regulations will also be facilitated by maintaining composure in stressful circumstances, avoiding excessive speeding, and riding cautiously.

   4. Check Where You’re Parking The Bike

It's a tropical country, India. The intensity of the heat and humidity varies from region to region. We typically have clear skies and strong, direct sunlight. Vehicles may experience some fuel loss as a result of evaporation, which is a drawback. Direct sunlight can damage the paint in addition to wasting fuel. The paint may lift and chip as a result of prolonged sun exposure.

When feasible, leave your bike in a shaded spot. It will prolong the life of the paint on your motorcycle in addition to assisting you in preventing fuel loss.

   5. Say No To Incessant Modifying

Typically, the phrase "modified bike" brings up images of a hulking two-wheeler with wide tyres and loud noises. Be aware that bike modifications can involve changing the seat, handlebars, tyres, or wheels in addition to their appearance. The fuel efficiency and performance of your bike can also be improved or worsened by a variety of unique components. 

Making modifications to your bike's engine, exhaust, or electrical components can have an impact on your bike's mileage. Before deciding to have the bike modified, one must consider the implications it will have in the long run.

Bonus Tip: 

Make it a habit to check your tyres' pressure each time you fill up your tank. The tyres are one of the most crucial parts of the motorcycle, although most people prefer to overlook them. Decreased-pressurized tyres on a motorcycle typically result in decreased fuel efficiency. Low air pressure expands the tyres' contact patch, which makes the engine work harder to generate the necessary velocity. The result is a reduction in mileage. Never over-inflate your tyres, either. If you do so, the ride will feel bumpy overall.   

Everyone despises being stuck in lengthy traffic jams or, for that matter, traffic signals. However, we frequently leave the engine running, which wastes fuel in unneeded ways. If the traffic timer indicates that it will take more than 30 seconds to turn green, it is always preferable to turn the bike off. The same holds true in cases of high traffic. If there is bad traffic, turn off the engine.